If you happen to pick up the November issue of FineScale Modeler, you will see an article I wrote several years ago on my Rehtna P. Hovertank. It’s only a few pages, but it’s really awesome that I am now in print. Hopefully this will inspire me to write a few more articles for other publications.
I finished a small, but detailed vignette featuring an AT-TE walker on Geonosis. Check it out here.
…a paint-stripper. Well, I didn’t like how the paint had laid on the Shuttle; it was grainy. I’m fairly convinced that the paint was drying as it hit the model. Thus, I need to use a paint retarder of some sort. So, I decided to soak the model in Windex and remove the acrylic layer. However, I found the while the Vallejo paint lifted perfectly, the AK acrylic Primer pretty much stayed on. I used a toothbrush to remove most of it (without damaging the lacquer primer underneath). Now, I’m letting it dry.
In other news, I bought an F-toys AT-TE, and I am making a small vignette with it. I did some slight weathering on the vehicle. Then, I used a picture frame and some DAS clay to create terrain. I created the spires from 5 minute resin. Basically, I just stirred the resin until it began to set, then lifted the stirrer. If I timed it right, I could create rather unique spire/obelisk shapes reminiscent of Geonosis.
I just want to thank all of the people who visit this page. I’ve noticed that my traffic has gone up in the last few weeks, and that makes me really happy…especially since I’m not selling anything, just sharing information. So, thank you for all my visitors, and a big thank you for everyone who has commented or contacted me.
By the by, if you have anything you would like to see or contribute (such as measurements of vehicles I don’t have in the scale lists), please feel free to email me. And if there are any questions you have about kits I have (or don’t have), I’ll be happy to answer them.
In the upcoming weeks, I’ll be finishing my Kylo Ren Shuttle. I also plan to buy a lot of Rogue One toys, like the Titaniums, Micro Machines, and maybe a few X-wing miniatures. And I’ll be picking up the new Rogue One Revell kits, as I REALLY want to build an AT-ACT and U-wing.