-
- The 2 main kits for the kit-bash
-
- These are pieces you may want to remove, as they could easily break off (and they don’t mix up easily).
-
- Completed layout. Nearly the entire base was scratchbuilt.
-
- White base color was chipped down to the primer. Then I added more chipping fluid & masks.
-
- Sprayed in a green/grey custom color. Masks removed
-
- Another shot
-
- Red highlights added
-
- Beginning to paint figure
-
- Used Tamiya putty to make barnacles
-
- Completed base. Used post-it notes to airbrush gradiants on the flat dock surfaces.
-
- Nearly all the panels were highlighted in some way. Most effects made by acrylics. Sponge chipping on most of the surfaces.
-
- Beginning to pour the 2-part resin water. About 7 layers were poured, each one very thin and tinted with color.
-
- Seaspeeder embedded and frame removed. I had to slice off the water that had crept up the sides, which left it rough.
-
- Applied the Water Effects with a brush and toothpick to wick the stuff into waves.
